banner



How To Change A Power Steering Pump On 06 Nissan Murano Youtube

How to Supercede an Altima's Ability Steering Pump

by Don Bowman

itstillruns article image

Jupiterimages/Photos.com/Getty Images

Replacing the power steering pump on a Nissan Altima is a straightforward procedure. It is not hard with the exception of the small-scale amount of space bachelor to access the bolts. The only symptoms involving a power steering pump failure are stiffness or difficulty in steering, or racket. If the steering has a trend to stick or accept excessive resistance only in certain spots, the trouble is in the rack and pinion.

Stride one

Loosen the bolt on the chugalug tensioner using a socket. Allow the tensioner to slide down away from the belt, and elevator the belt off the alternator. Identify the drip pan under the power steering pump.

Step 2

Remove the high-force per unit area power steering hose using a line wrench, and let information technology to drain into the bleed pan. Remove the low-pressure render hose past loosening the hose clamp with a screwdriver and pulling off the hose. Remove the three bolts securing the power steering pump to the block using a socket. Lift the pump out of the engine compartment.

Stride 3

Install the new pump by aligning it with the holes in the block, inserting the 3 bolts and tightening them with a socket. Install the high-pressure hose on the pump with a new O-ring on the end. Tighten this hose connector with a line wrench. Install the return hose by pushing information technology on the nipple and tightening the clench with a screwdriver.

Step 4

Install the belt over the power steering pulley and alternator. Apply the proper tension to the belt by turning the chugalug tensioner adjuster bolt clockwise until the proper tension is achieved. Lock it in identify past tightening the nut in the center of the tensioner pulley with a socket.

Fill the ability steering pump with fluid. Start the car, and turn the steering wheel to the left and correct to circulate the fluid. Recheck the fluid level.

More Articles

Source: https://itstillruns.com/replace-altimas-power-steering-pump-7643354.html

Posted by: carignangatellicited99.blogspot.com

0 Response to "How To Change A Power Steering Pump On 06 Nissan Murano Youtube"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel